Comparison of field sampling methods for assessing coarse woody debris and use of airborne laser scanning as auxiliary information

Coarse woody debris (CWD) has been recognized as one of the strongest indicators of forest biodiversity and its assessment has been emphasized in the development of new inventory methods. In this study, the most commonly referenced probability sampling methods were tested in a field area of 305.8 ha to gain comparative information on their performance and efficiency. Simple random sampling (SRS), systematic sampling and cluster sampling with fixed sized circular sample plots were tested, as well as strip sampling, transect relascope sampling and adaptive cluster sampling (ACS). Point relascope sampling and line intersect sampling were also tested for inventories of downed dead wood volumes. In addition, the amount of standing dead wood was assessed by means of traditional small angle relascope sampling. In general, the use of additional information in the inventory process has shown promising results. A new method for using data derived from airborne laser scanning (ALS) as a source of auxiliary information in the assessment of CWD volumes is presented, using probability proportional to size (PPS) sampling for the selection of the first-stage sample units in ACS (ACS_PPS) and for the placement of fixed sized plots (PLOT_PPS). The sampling methods were compared in terms of the cost-effectiveness. Point relascope sampling proved the most efficient sampling method for inventorying CWD volumes. PLOT_PPS and ACS_PPS were more efficient than the inventory of fixed sized plots (PLOT_SRS) and ACS (ACS_SRS) where sample units were selected with SRS. However, these methods could not achieve the same efficiency as relascope samplings. Nevertheless, the use of probability layers derived from ALS data gave promising results and offers new possibilities for inventorying CWD volumes more efficiently.     

Effect of citral,eugenol, nerolidol and α-terpineol on the ultrastructural changes of Trichophyton mentagrophytes

The antifungal effects of citral, eugenol, nerolidol and α-terpineol on Trichophyton mentagrophytes were investigated. Citral over 0.1 mg/ml strongly inhibited the hyphal growth of T. mentagrophytes, and the antifungal activity of α-terpineol was less effective. The morphological changes of the fungus exposed to the terpenes were observed by electron microscopy. The hyphae were distorted and collapsed at 0.2, 0.4 and 1 mg/ml of eugenol, nerolidol and α-terpineol respectively, and cell membrane and organelles were irreversibly damaged at 0.2 mg/ml citral.     

云南木蠹象触角感器的扫描电镜观察

利用扫描电镜对云南木蠹象雌雄成虫触角上的感器进行观察和研究.结果表明:云南木蠹象成虫触角膝状,由柄节、梗节和鞭节组成,其中鞭节由7个亚节组成.在雌、雄成虫触角上均存在6种感器,即毛形感器、锥形感器、脚形感器、芽形感器、端指形感器和腔形感器,其中毛形感器和端指形感器的数量较多;此外,雌成虫触角还有双芽形感器,雄成虫触角上还有耳形感器.与端指形感器、脚形感器、双芽形感器结构相同的感器在鞘翅目已有的研究资料中还未见报道.是新发现的昆虫触角感器.对云南木蠹象触角不同种类感器的形态、分布以及雌雄间触角感器的分布和数量差异进行描述.     

利用三维激光扫描系统测量立木材积的方法

介绍三维激光扫描系统的组成及工作原理,并采用该方法对立木进行扫描,测量立木材积。与伐倒木实测数据进行对比,可以看出扫描数据完全能满足林业测量的精度要求,其扫描获得的立木材积数据完全可以替代传统方法测算的立木材积数据,使用立木模型建立材积表不再需要实地大量伐木,节省大量人力、物力及财力。应用三维激光扫描技术进行立木材积测定能较好的避免传统测定方法的不足,在未来的林业数字化测量中有广阔的应用前景。     

粮仓温度巡检系统的设计与实现

针对粮仓特点,设计了基于RS485总线的集散式温度巡检系统．该系统以数字式单总线温度传感器DS18820为核心,采用C8051F005单片机作为变送器控制核心,实现DS18820温度数据的采集与总线控制．系统在电路板设计、布线、总线接口等方面采取了抗干扰措施,有效地避免了由于干扰信号、雷电等因素造成系统损坏的可能,提高了系统的可靠性．控制室计算机与各温度节点采用主从工作方式,由控制室计算机实现对各温度节点信息的采集、显示与存储．系统长期工作表明：利用RS485总线实现的集散式温度巡检系统,可靠性高,方便与现有其他工业现场RS485总线连接,扩大了应用范围．     

Structure and properties of the cellulose microfibril

The current structural models of the cellulose microfibril as well as its mechanical and thermal properties are reviewed. The cellulose microfibril can be considered as a single thin and long crystalline entity with highly anisotropic physical properties. The contribution and limit of different methods employed such as electron microscopy, infrared spectroscopy, X-ray scattering and diffraction, solid state nuclear magnetic resonance spectroscopy, and molecular modeling are also discussed.     

微波干燥与常规干燥中木材内含水率动态分布

以黑胡桃木材为对象,采用X射线扫描含水率分布测试方法,分析、比较了微波干燥与常规热风干燥过程中木材内部含水率动态分布规律.结果表明:在微波干燥和常规热风干燥过程中,木材内层含水率均高于表层,存在着整体性的内高外低的含水率梯度场;在接个微波干燥过程中,木材内部虽然出现了部分内层含水率低于外层的情况,存在着含水率分布的局部不均匀,但并未出现与常规热风干燥相反的含水率梯度;在微波干燥中,木材内部各层与表层含水率的差值随着干燥时间的延长逐渐降低.随着干燥过程的进行,常规热风干燥中木材芯层与表层含水率差呈现出先增加后减小的变化趋势.     

无公害食品中铅GFAAS仪器测定条件图谱扫描优化分析

扫描不同测定条件下铅石墨炉原子吸收信号的图谱,通过分析图谱的变化参数,直观地优化测定条件.分析结果表明:扫描图谱可快速优化铅石墨炉原子吸收的测定条件(灯电流、狭缝、干燥温度,时间、灰化温度,时间、原子化温度/时间等),大大减少分析干扰,提高分析结果的准确度.分别对几种水果蔬菜样品的测试,加标回收率均在(100±3)%内.测试国家标准物质,其结果落在标准值范围.     

蚕豆萎蔫病毒2号分离物PV131和P158侵染寄主植物的细胞病理比较观察

 透射电镜观察比较了蚕豆萎蔫病毒2号(BBWV-2)分离物PV131和P158侵染昆诺藜(Chenopodium quinoa)和蚕豆(Vicia faba)的细胞超微结构变化。结果显示:受PV131分离物侵染的昆诺藜叶肉细胞质中膜结构大量增生,形成有膜状结构、大小泡囊及电子致密物质的特殊膜增生区;病毒粒子散布在细胞质中,形成大块结晶体和管状结构,该管状结构直径约75nm,横切面由9个病毒粒子组成;受PV131侵染的蚕豆叶肉细胞中也形成膜增生区和管状结构,未见病毒结晶体。受P158分离物侵染的昆诺藜和蚕豆叶肉细胞病变情况与PV131分离物相似,形成膜增生区和相同的管状结构,在蚕豆叶肉细胞中也未观察到病毒结晶体。上述结果表明:2个BBWV-2分离物虽然在不同寄主植物上引起的细胞病变程度有差异,但其细胞病理学特征是由病毒基因结构所决定,与寄主的种类无关。     

柴油喷雾燃烧火焰内部碳烟采集与分析

为研究碳烟颗粒在柴油喷雾火焰内部的演变规律,在可视化定容弹喷雾燃烧系统中增加一种基于热泳原理的碳烟颗粒采集装置,获得了喷雾燃烧火焰内部的碳烟颗粒样本,并在高倍透射电镜下获得样本中不同尺度的碳烟形态图像。根据图像中碳烟宏观和微观形态结构特征分析了碳烟生成、聚合等演变历程。通过自行开发的图像处理程序,分析得到碳烟颗粒尺寸参数随喷射距离的变化特征。研究表明,该方法实现柴油机缸内高温高压特征环境下碳烟颗粒的采集与高倍电镜分析技术的有机结合,有效获取柴油喷雾火焰内部碳烟颗粒微观信息,为减少柴油机碳烟排放提供了重要研究手段和基础研究信息。